Aurifil – Blue Bear Quilts

This is my August 2022 project as an Island Batik Ambassador. This month’s challenge was to make a mini quilt using any technique and Island Batik fabric. The quilt could be no larger than 24″ x 24″. I designed this quilt on my computer using Electric Quilt 8 software. This size of this quilt, which is perfect for Blue Bear, is 12″ x 12″.

I chose to use fabrics from the Island Batik collection called “Jewel Carvings” and I also used their solid black. These colors are so delicious.

When designing a quilt, it is important to make sure that you have a proper mix of light, medium and dark shades in your quilt. One way to determine this is to take a monochromatic picture of your fabrics to more clearly see the shades. Notice how the values go from dark to light when looking at the fabrics from left to right. In the completed quilt, I wish there was a little more value change between the purple and blue. Those are the two fabrics farthest to the left in the monochromatic image, followed by the green and yellow.

This quilt is comprised of 1-1/2″ unfinished squares and half square triangles. I used a method of making 8 half square triangles at a time. You can find many articles for how to do this if you do a google search. I wanted 1-1/2″ unfinished half square triangles, so that meant that I needed to start with 4-1/2″ squares. For example, if I wanted to make the blue/green half square triangles, I would need to place green and blue 4-1/2″ squares right sides together. The nice thing about using Island Batik fabrics for this project is that you don’t really have to worry about right and wrong sides, even though technically there is a right side. Then I drew lines horizontally, vertically and diagonally in both directions in the middle of the square. Next, I sewed 1/4″ on either side of the drawn diagonal lines.

Next, I cut on the horizontal, vertical and diagonal lines I drew. You don’t cut on the sewn lines. This creates 8 half square triangle units.

Next. I needed to press the half square triangles and I chose to press toward the dark side. When the units are lined up for sewing, you may need to press some of them the other way so that they will nest and not create as much bulk in the seams.

In order to successfully sew a quilt with such small pieces, it’s important to maintain the proper squared-up size of the unfinished units, which in this case is 1-1/2″. I used the small 1-1/2″ Bloc-Loc ruler to accomplish this. This ruler has grooves on the back of it that slide along the ridge of the pressed over fabric and it allows you to trim up 2 sides of the unit at a time.

I have a YouTube video showing how to to trim up these units using the Bloc-Loc ruler. Here is a link to that video: https://youtu.be/hUHR_SmPLe8

Once the units were all squared up, I laid them out in the positions they would be in the quilt. This is where you would look at which blocks are being sewn together and determine if you need to press them the other direction so that seams will nest.

Sewing the units together, I slowed my Janome 6600 down and used a quarter inch foot so that I could obtain an accurate 1/4″ seam. This is crucial when sewing a mini quilt as if you are off by an 1/8th of an inch, that adds up quickly and your quilt will no longer be the correct size. I sewed one row at a time and pressed each row in the opposite direction. When sewing the rows together, I pressed the seams open to reduce bulk. Here is a picture of the back of the quilt and you can see that there are a lot of intersecting seams, which is why all of these measurements being accurate is so important.

Finally, I made a quilt sandwich by placing a piece of Hobbs 80/20 black batting between the quilt top and a piece of black backing. I pinned the layers together to prevent shifting when quilting the layers together. I used Aurifil 50 weight cotton thread in several different colors on the top. I loved how easy it was to find shades of thread color that matched the Island Batik fabric. I slowed my Janome 6600 down again and used the dual action walking foot to stitch in the ditch, which was a breeze. I love domestic machine quilting on a project this size. It’s so easy!

I machine stitched on the black binding. Here is a picture of the completed quilt and a close up of the stitching in the ditch.

Blue Bear’s Quilt is finished. I think he loves it! He is so thankful as he finally has a quilt that is his size. He can’t use the big people’s quilts. He will now have his own quilt to snuggle up with at night and he loves the fact that the quilt has blue stars that are the same color as him.

Be sure to follow along and subscribe to all our social media (Instagram, Facebook, Twitter and Tic Tok) as I will be making a beautiful Southwestern themed 60 degree star quilt using the Deb Tucker’s Studio 180 Star 60 ruler next month. You won’t want to miss it.

The supplies I used to make this project were provided by:

Island Batik Jewel Carvings collection for the top.

Aurifil 50 wt Thread

Hobbs black 80/20 Blend Batting

Schmetz 70/10 Quilting needle

Thank you Island Batik, Aurifil Thread, Hobbs Batting, and Schmetz Needles.

The other Island Batik Ambassadors have also been busy creating Mini quilts in their August projects. If you would like to see what the other ambassadors have been up to, check out their projects by clicking on the links next to their names to be directed to their blog posts.

Jennifer Thomas, Curlicue Creations
Denise Looney, For the Love of Geese

Pamela Boatright, Pamela Quilts
Andi Stanfield, True Blue Quilts

Megan Best, Bestquilter

Maryellen McAuliffe, Mary Mack Made Mine
Brenda Alburl, Songbird Designs

Emily Leachman, The Darling Dogwood
Leah Malasky, Quilted Delights

Suzy Webster, Websterquilt
Connie Kauffman, Kauffman Designs

Brianna Roberts, Sew Cute and Quirky
Sandra Starley, Textile Time Travels

Michelle Roberts, Creative Blonde
Jane Hauprich, Stitch by Stitch Custom Quilting

Claudia Porter, Create with Claudia

Anorina Morris, Samelia’s Mum
Preeti Harris, Sew Preeti Quilts

Elizabeth DeCroos, Epida Studio
Gail Renna, Quilt Haven Threads

Gail Sheppard, Quilting Gail
Jennifer Fulton, Inquiring Quilter

Mania Hatzioannidi, Mania for Quilts
Lisa Pickering, Lisa’s Quilting Passion

#islandbatikambassador #islandbatik #iloveislandbatik #hobbsbatting #aurifil #aurifilthread #schmetzneedles #doyoueq #EQ8 #electricquilt #Janome #bloc-loc

This is my July 2022 project as an Island Batik Ambassador. The first part of this month’s challenge was to use the Accuquilt Tree of Life die to create a unique project. Accuquilt provided the Tree of Life die, and Island Batik provided fabric, to the Ambassadors so they could create their projects in this challenge. This die is a BOB or block on board. What that means is that you are able to cut all of the pieces you need to complete a tree of life block with one pass through the cutting machine.

The die has metal blades set in foam and when you place the fabric on the die and cover it with a mat, there is a roller in the cutter that presses down on the fabric and cuts out the needed shapes. Here is a Tik Tok video I did showing how I cut out the fabric.

I designed the quilt in Electric Quilt and this is the design I came up with. It is a bright and colorful design, orienting four tree of life blocks toward the outside corners. The blocks are uniquely colored to create the graphic design of the quilt. It almost has an Art Deco feel to it.

I needed some wonderful solids to make this quilt. Did you know that Island Batik has solids? Well, they do! I chose solids in red, blue, yellow, orange, green and lime. I used stash buster strip rolls for the colors and accented them with white and black to make them shine. The stash busters are 5″ wide strips and are great to work with on this type of project as they are already cut into a smaller size to be able to use with the Accuquilt Die.

Here is how I laid out the blocks after I had cut all of the desired shapes. It is really helpful to lay out your block ahead of time to keep everything organized. The half square triangles were sewn in rows and then the rows were sewn together. The Accuquilt die has great instructions for how to sew the block together.

As mentioned above, a great thing about cutting out your shapes with the Acccuquilt Tree of Life die is that all of the shapes you need for one block can be cut with one pass through the cutting machine. You can put 6 layers of fabric on the die, so you could cut out 6 blocks at once. Also, the dog ears are cut off and if you are a really good sewist, there is no trimming that is needed to square up the blocks.

After I had the quilt top sewn together, using my favorite thread, Auriful, it was time to make a quilt sandwich with some awesome batting (Heirloom 80/20 blend) provided by Hobbs Batting.

Time to quilt with my Janome 6600. This machine is a power horse! I knew I wanted to quilt in straight lines, so I used my favorite quilting ruler for that purpose- the Line Tamer by Four Paws Quilting. Your ruler work foot just follows the cut out groove in the ruler and gives you nice straight lines.

Voila! The quilt is all done. I machine pieced the black binding to the front and then used clips to hold the binding in place on the back while I stitched in the ditch on the front.

Part two of this Christmas in July project was to gift the quilt to someone and bring them a little joy. When I decided on the name of the quilt, I knew who I wanted to give it to as a gift. I named the quilt “Tree of Life From the Underside.” Imagine laying on the ground, under a tree, and looking up at the bottom of the branches spreading out. I felt the quilt gave this perspective of the tree.

I see the tree of life as representing life, liberty and the pursuit of happiness. Many in society are able to stand alongside the tree and enjoy the view from many perspectives. Yet there are others around the world who do not have that same ability and they are kept under the tree and can’t enjoy all of the beauty the tree represents. These people may include the elderly, poor. foreigners, women, gays, jewish people, blacks, asians, indigenous people or people with disabilities. They want to see the tree from all sides and the wonderful things it represents, but they are kept down below the branches.

There is a poem, by Poet Laureate, Amanda Gorman, called “_ _ _ _ _Gated.” In the poem she compares how the pandemic was a leveler, and all were equally prevented from doing what they wanted to do, or told what they had to do. Sharing for a brief time what it feels like to be living in the margins.

Here are a few quotes from the poem. “To be haunted is to be hunted by a history that is still hurting. Needing healing as much as we do. … Call us… colonized, …cleansed, controlled, killed, … contained, concentrated, conditioned… We have yielded centuries of sidewalk, trained in this tradition before we even lived it- what it is to bow our heads & make room for someone else’s pride, that ceding of the walkway…Why is it so perturbing for privileged groups to follow restrictions of place & personhood. Doing so means for once wearing the chains their power has shackled on the rest of us….Meanwhile for generations we’ve stayed home,…kept out of public spaces…kept out of ballot boxes, kept out of office, kept out of the army, kept out of hospitals…kept out of jobs, kept out of schools, kept out of sports…kept out of land, kept out of kept in kept from kept behind kept below kept down kept without life. Some were asked to walk a fraction/ of our exclusion for a year & it almost destroyed all they thought they were. Yet here we are. Still walking, still kept. To be kept to the edges of existence is the inheritance of the marginalized. …If we remember anything, let it be to remember. A road forward we shall have if we keep walking.”

This poem is powerful and it is found in her book called ” Call us what we carry.” If you can find a copy of the book at your local bookstore, or library, I would urge you to do so.

For me, the tree also represents hope. growth and rebirth. The leaves of the tree are all unique and yet they are interconnected. The tree is strong and provides shelter from the storms. Under the tree is also a place for peace and tranquility. Finally it is a place for growth and rebirth. A mighty oak grows from a tiny acorn. Each year the leaves turn brown and die but then are reborn in the Spring with the prospect of new growth. As we keep walking, the tree keeps inspiring growth.

I wanted to give this quilt to someone who treats everyone as equal and places no one in the margins, even as difficult as that may be in a society that likes to create margins. Someone who keeps walking. Someone immediately came to mind. It was a friend, Pastor Joyce Stone. She is a pastor of a church in Florida that not only welcomes all but affirms their very nature. Christ the Cornerstone is a beacon of light for all. When I told Pastor Joyce about the gift, she told me that they have a tree of life in the church where people can place leaves about the things God has done for them in their lives. I knew I had made the right choice for the gift recipient.

I placed a hanging sleeve on the back of the quilt so that it may be hung for all to see. It is my desire that the quilt will stand as a symbol of the hope, growth and rebirth the tree represents. I hope it will inspire those who can stand alongside the tree, and enjoy all of its beauty and freedom, to come to the underside and see the shelter, strength and connectivity the tree provides and invite those living under the tree to come and stand beside the tree with them. I also hope that those who may only see the tree from the underside will keep walking so that one day they will be able to stand alongside the tree and see the life, liberty and happiness it provides from all angles.

Here is a picture of Pastor Joyce with the quilt. Her smile radiates Joy!

Pastor Joyce and I in front of the Tree of Life in her church

If you would like to see me talking about the quilt, I also have a YouTube video about it on my YouTube channel, Blue Bear Quilts. Here is a link to the video: https://youtu.be/duB3fqtL2ac

The supplies I used to make this project were provided by:

Island Batik Stash Buster 5″ strip roll for the top.

Accuquilt Tree of Life Die

Aurifil 50 wt Thread

Hobbs 80/20 Blend Batting

Schmetz 70/10 Quilting needle

accuquilt

Thank you Island Batik, Accuquilt, Aurifil Thread, Hobbs Batting, and Schmetz Needles.

The other Island Batik Ambassadors have also been busy creating Christmas in July projects. If you would like to see what the other ambassadors have been up to, check out their projects by clicking on the links next to their names to be directed to their blog posts.